Powerbeats Fit are ready to pair right out of the box. Before you begin, make sure your device has the latest version of iOS or iPadOS installed. When pairing, your device must have Bluetooth^® wireless technology turned on and also be connected to a Wi-Fi or cellular network, or you may not have access to Find My features.

Open the case with your earbuds inside, then hold it next to your unlocked device. Follow the onscreen instructions, then tap Done.

If you don’t see the setup animation, you can pair Powerbeats Fit with your device manually. Go to Settings > Bluetooth, then select your Powerbeats Fit. Press and hold the system button on the inside of the charging case for about 5 seconds with the earbuds inside, or until the light pulses white.

After you set up your Beats with one Apple device (like your iPhone), your Beats are automatically paired to your other devices (like your Apple TV or Mac) where you’re signed in to the same Apple Account, so you can connect with just a tap.

Note: there is no Beats app for iOS or iPadOS. All settings can be adjusted in your device settings.

Before you begin, make sure your device has the latest Android operating system installed. When pairing, your device must also be connected to a Wi-Fi or cellular network, or you may not have access to Find My features.

With the Beats app running, simply open the lid of with your earbuds seated in the case, hold near your unlocked phone, and follow the on-screen instructions. You can also pair your product in the standard Bluetooth^® menu. Download the Beats app from your app store or directly from beatsbydre.com/mobile-apps for compatible devices.

Press and hold the “b” button to toggle between Active Noise Cancelling (ANC) and Transparency mode. A tone plays when the listening mode changes.

You can also control listening modes, including Adaptive EQ (with ANC and Transparency off), and customize button setup within iOS Settings or the Beats app for Android.

You can configure the press-and-hold function of the ‘b’ buttons to toggle listening modes or activate voice assistant. Alternatively, you can customize the ‘b’ button to manage volume controls with volume down on the left earbud and volume up on the right earbud.

On Apple devices, go to Settings, then tap or click the name of your Powerbeats Fit product to change the Press and Hold settings.

On Android devices, go to the Beats app and tap or click the name of your Powerbeats Fit product. Scroll down and tap or click Press and Hold to adjust settings.

Powerbeats Fit come with four sets of ear tips: extra-small, small, medium, and large. Medium ear tips come attached to the product. The right fit is crucial to achieve optimal comfort and sound quality.

First, insert the earbud and rotate backward into a comfortable position. Next, tuck the wingtip into your upper ear to secure your fit. Check your fit with the Ear Tip Fit Test on iOS or the Beats app on Android to ensure an optimal listening experience and acoustic seal.

Powerbeats Fit can provide up to 7 hours of continuous listening time with ANC or Transparency turned off, or up to 6 hours of continuous listening time with ANC or Transparency turned on. The case holds around three additional charges for a combined total of 30 hours with ANC or Transparency off or 24 hours with ANC or Transparency turned on.

Firmware updates will occasionally be made available to enable new features or improve the product experience. These updates are delivered automatically as you use your Powerbeats Fit when connected to an Apple device connected to Wi-Fi and running the latest operating system software. On an Android device, use the Beats app to check and update the firmware version for your Powerbeats Fit.

You can use Find My on your iPhone, iPad, Mac, or Apple Watch to see your Beats last connected location on a map. You can also find your Beats on the web at iCloud.com/find.

On your Android device, use the Beats app for Android to locate your Beats.