Here's everything you need to know to make the most of your Solo3 Wireless headphones.

  1.  

    Turn on

    Press and hold the power button for about a second to turn your headphones on or off.

  2.  

    Set up

    If you have an iPhone using iOS 10, follow these steps. When you set up your headphones in this way, they set up automatically with your other devices that are signed in to iCloud and using iOS 10, macOS Sierra, or watchOS 3.

    1. Hold your headphones next to your unlocked iPhone.
    2. Press the power button on your headphones for 1 second.
    3. After a few seconds, your iPhone asks you to connect. If it doesn't, press the power button on your headphones for 5 seconds.
    4. Follow the instructions on your iPhone.

    If you have some other Bluetooth device, follow these steps to pair your headphones with that device:

    1. Press the power button for 5 seconds. When the Fuel Gauge flashes, your headphones are discoverable.
    2. Go to Bluetooth settings on your device.
    3. Select your headphones from the list of discovered Bluetooth devices.
  3.  

    Connect to a different device

    Your headphones automatically reconnect to the last device you used with them. To connect to a different device, follow these steps.

    iPhone, iPad, or iPod touch using iOS 10:

    1. Open Control Center by swiping up from the bottom edge of the screen.
    2. Swipe to the side in Control Center to show the Now Playing card.
    3. Tap the device name in the corner of the card, then choose your headphones from the list of playback devices. If you don't see your headphones, follow the steps for all other devices, below.

    All other devices:

    1. Go to Bluetooth settings on your device. On your Mac, you can just click the Bluetooth icon in the menu bar.
    2. Select your headphones from the list of Bluetooth devices. If you don't see your headphones after a few seconds, press and hold the power button for 5 seconds.
  4.  

    Charge

    Plug your headphones into a power source using the included micro USB cable. As the headphones charge, the Fuel Gauge lights flash. When charging is complete, all five lights will remain lit.

    Your headphones provide up to 40 hours of playback from 2 hours of charging, and up to 3 hours of playback from a 5-minute charge.

    To conserve battery or use your headphones when the battery is depleted, plug in the RemoteTalk cable to use your headphones in wired mode.

  5.  

    Control

    To control audio playback, use the b button on the left earcup, or the center button on the included RemoteTalk cable.

    • Press once to play or pause audio playback.
    • Press twice to skip to the next track. Press three times to skip backward.
    • Press twice and hold on the second press to scan forward through a track. Press three times and hold on the third press to scan backward through a track.

    To control playback volume, use the volume buttons on the left earcup or the RemoteTalk cable. To control call volume, use the volume controls on your phone.

    • Press and release the volume up button, or press and hold to increase volume continuously.
    • Press and release volume down button, or press and hold to decrease volume continuously.

    To control phone calls, use the b button on the left earcup, or the center button on the RemoteTalk cable.

    • Press once to answer or end a call.
    • Press once to answer a second incoming call and put the first call on hold. When two calls are active, this switches between calls.
    • Press and hold for 1 second to reject an incoming call.
    • Press twice to stop listening through your headphones and send the call to the phone.

    To activate Siri on your iOS device or the voice-command feature on another device, use the b button on the left earcup, or the center button on the RemoteTalk cable. Just press and hold until you hear a chime, then say what you need.

    To check the Fuel Gauge, which shows battery level and charging status, press and release the power button.

  6.  

    Reset

    1. Hold down these two buttons for 10 seconds:
      •    Power button
      •    Volume down button
    2. When the Fuel Gauge flashes, release the buttons. Your headphones are now reset and ready to be set up with your devices again.
  7.  

    Update

    Your headphones are automatically kept up to date when they're set up with an iPhone using iOS 10.

Set up and use your Solo3 Wireless Headphones

Was this helpful?

YES NO