Set up and use your Studio Wireless headphones

  1. Pair your headphones

    1. Make sure that your headphones aren't connected to an audio cable.
    2. Turn your headphones on. The Bluetooth LED on the left earcup blinks.
    3. Connect to your headphones with your phone or music player.
    4. The Bluetooth LED blinks four times to confirm that a connection has been made.

    To turn on pairing mode so that you can connect to a new device, press and hold the b button for 2 seconds.

  2. Disconnect or reconnect

    • To disconnect your Bluetooth connection, press and hold the b button.
    • To reconnect to the last Bluetooth device that you used, press and release the b button.
  3. Use ANC-only mode

    To turn on ANC-only mode, press and hold the power button and the b button for 1 second.

  4. Control your music


    • To play or pause music, press and release the b button.
    • To skip to the next track, press the b button twice.
    • To scan forward, press the b button twice and hold on the second press.


    • To play the previous track, press the b button three times.
    • To scan backward, press the b button three times and hold on the third press.
  5. Take calls

    • To answer or end a call, press the b button once.
    • To take a call from your phone rather than your headphones, double-press the b button.
    • To reject an incoming call, press and hold the b button for 2 seconds.
  6. Learn what the lights on your headphones show

    LED Status
    Fast pulsing Searching for Bluetooth connection
    On (solid) Connected to Bluetooth
Bluetooth Basics—Studio Wireless

Was this helpful?