If you have sound, Bluetooth or charging issues with your speakers, you might want to reset them.

  1.  

    Reset and keep settings – Beats Pill+

    1. Hold down the power button for eight seconds, then let go. 
    2. Press the power button once. The fuel gauge will flash from white to red three times. Your device has now been reset.
  2.  

    Reset and delete settings – Beats Pill+

    If you want to remove all paired devices, remove the customised name and reset your Beats Pill+to its factory settings, follow these steps.

    1. Use the Lightning-to-USB cable to plug your Beats Pill+ into a power source.
    2. Turn the speaker on.
    3. Hold down both the 'b' button and the power button for six seconds
    4. The fuel gauge will flash red six times. Your Beats Pill+ has now been restored to the settings it had when you purchased it.
  3.  

    Reset Beats Pill

    1. Turn on your Pill.
    2. Press and hold the 'b' button and the power button for ten seconds.
    3. The LED lights next to the power button will blink red and green three times.
  4.  

    Reset Beats Pill 2.0

    1. Turn on your Pill 2.0.
    2. Press and hold the 'b' button and the power button for ten seconds.
    3. The LEDs will blink red and green three times.
  5.  

    Other things that you can try

    Still having issues with your speakers? Try these things next:

Reset your Beats speakers

Was this helpful?

YES NO